Windows command line control

LightwaveRF Communi… > Forum > LightwaveRF Hackers > Windows command… > Page 9

LightwaveRF Community: Welcome Forums LightwaveRF Hackers Windows command line control

This topic contains 122 replies, has 12 voices, and was last updated by  jamieburchell 1 month, 3 weeks ago.

Viewing 3 posts - 121 through 123 (of 123 total)
  • Author
    Posts
  • #23471
     jamieburchell says:

    jamieburchell
    Participant

    Version 7.1 is up

    - Support open, close and stop relay switches
    - Support unlinking TRV and Thermostats
    - Support colour changing and cycling some supported LED lighting
    - Renamed “register” to “link”
    - Renamed “–cancel-all” to “cancel-all”
    - Max heating devices 80
    - Max rooms/devices 15

    Cheers
    https://github.com/jamieburchell/lwrf.cmd

    #23908
     jemhayward says:

    jemhayward
    Participant

    I finally got around to replacing my old version with the latest version, though the old version was working fine.

    I think that I have C&P all the relevant bits from my old version to the new, and everything seems to work, except kitchen KMusic

    I must have done something stupid, but I cannot figure out what: Can anyone spot my deliberate error?

    This is the old file (working)
    :: /////////////////////////////////////////////////
    :: DO NOT EDIT ABOVE THIS POINT //
    :: /////////////////////////////////////////////////

    :: — Basic configuration ————————–
    set wifi_link_host=192.168.157.10
    set wifi_link_port=9760
    set source_port=9761
    set debug=0
    :: ————————————————-

    :: — Room configuration —————————
    :: Add as many rooms as necessary (max 16)
    :: E.g:
    :: R1=spare bedroom
    :: R2=living-room
    :: R3=office
    set R1=nowhere
    set R2=lounge
    set R3=kitchen
    set R4=bedroom
    set R5=bathroom
    set R6=barn
    set R7=office
    set R8=
    :: ————————————————-

    :: — Room/Device configuration ——————–
    :: Add as many devices as necessary (max 16 per room)
    :: see below for TRVs
    :: E.g:
    :: R1D1=lights
    :: R1D2=plug socket
    :: R2D1=tv
    set R1D1=lights
    set R2D1=inglenook
    set R2D2=HiFi
    set R2D3=redlights
    set R3D1=KMusic
    set R3D2=lightshob
    set R3D3=lightsblue
    set R3D4=Gaggia
    set R3D5=DiningLights
    set R4D1=BMusic
    set R2D4=poweramp
    set R2D5=dac

    :: ————————————————-

    :: — Room/Mood configuration ———————-
    :: Add as many moods as necessary (max 3 per room)
    :: E.g:
    :: R1M1=relax
    :: R1M2=movie
    set R6M1=relax
    set R2M1=HiFi
    :: ————————————————-

    :: — TRV configuration —————————-
    :: Add as many TRVs as necessary (max 8)
    :: E.g:
    :: TRV1=lounge
    :: TRV2=hall
    :: ————————————————-

    :: /////////////////////////////////////////////////
    :: DO NOT EDIT BELOW THIS POINT //
    :: /////////////////////////////////////////////////

    and this is the new file::: /////////////////////////////////////////////////
    :: DO NOT EDIT ABOVE THIS POINT //
    :: /////////////////////////////////////////////////

    :: — Basic configuration ————————–
    set wifi_link_host=192.168.157.10
    set wifi_link_port=9760
    set source_port=9761
    set debug=0
    :: ————————————————-

    :: — Room configuration —————————
    :: Add as many rooms as necessary (max 15)
    :: E.g:
    :: R1=spare bedroom
    :: R2=living-room
    :: R3=office
    set R1=nowhere
    set R2=lounge
    set R3=kitchen
    set R4=bedroom
    set R5=bathroom
    set R6=barn
    set R7=office
    set R8=
    :: ————————————————-

    :: — Room/Device configuration ——————–
    :: Add as many devices as necessary (max 15 per room)
    :: see below for TRVs and thermostats
    :: E.g:
    :: R1D1=lights
    :: R1D2=plug socket
    :: R2D1=tv
    set R1D1=lights
    set R2D1=inglenook
    set R2D2=HiFi
    set R2D3=redlights
    set R3D1=KMusic
    set R3D2=lightshob
    set R3D3=lightsblue
    set R3D4=Gaggia
    set R3D5=DiningLights
    set R4D1=BMusic
    set R2D4=poweramp
    set R2D5=dac
    : : set R3D1=Music System

    :: ————————————————-

    :: — Room/Mood configuration ———————-
    :: Add as many moods as necessary (max 3 per room)
    :: E.g:
    :: R1M1=relax
    :: R1M2=movie
    set R4M1=relax
    set R2M1=HiFi

    :: ————————————————-

    :: — TRV/Stat configuration ———————–
    :: Add as many TRVs/Stats as necessary (max 80)
    :: Each TRV/stat must be on a different number
    :: E.g:
    :: TRV1=lounge
    :: TRV2=hall
    :: STAT3=lounge
    :: STAT4=hall
    :: TRV5=kitchen
    set STAT1=main
    set TRV2=master-bedroom
    set TRV3=lounge
    set TRV4=kitchen
    set TRV5=spare-bedroom
    :: ————————————————-

    :: /////////////////////////////////////////////////
    :: DO NOT EDIT BELOW THIS POINT //
    :: /////////////////////////////////////////////////

    #23909
     jamieburchell says:

    jamieburchell
    Participant

    Hi!

    This line is incorrect:

    : : set R3D1=Music System

    If you meant to temporarily remove that line (“comment it out”) is should start with a double colon with no spaces in between:

    :: set R3D1=Music System

Viewing 3 posts - 121 through 123 (of 123 total)

You must be logged in to reply to this topic.