Switch selection

This topic contains 2 replies, has 2 voices, and was last updated by  jonmarkwright 1 week, 4 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #23347
     jonmarkwright says:

    jonmarkwright
    Participant

    Hi,

    I’m new to lightwaverf so please bare with me. I have been doing my research and struggling to find the exact answer to my queries even thou I know they will definitely been asked before.
    To avoid wasting anyone’s time a simple yes/no will suffice if need be.

    1. On a single switched living room light where I currently have a 1 way 1 gang dimmer, what switch will I need to buy to replace this? I am guessing it will need to be a 1 gang 2way master dimmer? I presume a slave will not work?
    2. Hallway landing light standard setup where I have a 2 gang 2 way switch in the hall way with a 1 gang switch upstairs will I replace these with a 2 gang 2way master dimmer for the hall and a 1 gang 2 way slave dimmer for the landing?

    regards jon

    #23350
     Node Zero says:

    Node Zero
    Participant

    Right on both counts.

    #23398
     jonmarkwright says:

    jonmarkwright
    Participant

    Thank you for the reply Node Zero.
    I have read somewhere that maybe for the landing 1 gang switch i maybe best going for a on off switch and just wifi to the entrance hall switch as the wiring may not lend itself to a lightwaverf slave circuit?
    any thoughts?

    kind regards jon.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.