Random light control

This topic contains 1 reply, has 2 voices, and was last updated by  btidey 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #23838
     John says:


    I have one on / off plug in socket that is assigned to a room, but nearly always does not turn off at night. It’s also on two RF controllers. When all the lights turn off at 11pm I have to use the controller to turn the other one off, sometimes having to press the button twice. It comes on with all the other lights assigned to this room. They are all on on / off plug in sockets 4 in total. Any ideas whats going on?

     btidey says:


    Have you tried swapping the plug in units to see if the problem follows the plug in unit or remains with the location?

    I assume the off is from a timer event sequence from the link controller. Is manual operation from the link controller OK (simple on/off from the app)?

    Having to press it twice would sound like a problem with marginal reception, either something about the location or a faulty unit having gone low sensitivity.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.