Possible Failure of Switched Socket?

LightwaveRF Community: Welcome Forums Installation and Troubleshooting Possible Failure of Switched Socket?

This topic contains 3 replies, has 2 voices, and was last updated by  AndreWilley 5 years, 8 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #412
     Rob Robinson says:

    Rob Robinson
    Participant

    I have successfully been using a 2 gang 13A switched socket for a couple of weeks, but one socket (the left one) seems recently to have failed. Its behaviour is as follows:
    1) Blue led is always on.
    2) Power is not being delivered to anything plugged into this socket
    3) Pressing the manual button has no effect: the led does not change to amber
    4) Commands from the master wall controller which previously worked no longer function.

    The other socket in the unit functions normally, and all other sockets, switches and controller operations in my system are also fine.

    Any suggestions for restoring functionality or testing for the nature of the failure?

    Thanks

    Rob

    #1198
     AndreWilley says:

    AndreWilley
    Participant

    I assume you’ve tried turning off the main ring main circuit breaker to see if that resets it?

    Andre

    #1199
     Rob Robinson says:

    Rob Robinson
    Participant

    Like a fool, I hadn’t :oops:

    Ring main reset has resolved the problem <img src=” title=”Very Happy” /> – many thanks Andre

    #1201
     AndreWilley says:

    AndreWilley
    Participant

    You’re welcome.

    Andre

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.