Multi input output device

LightwaveRF Communi… > Forum > Future Products > Multi input output…

LightwaveRF Community: Welcome Forums Future Products Multi input output device

This topic contains 0 replies, has 1 voice, and was last updated by  Bazzer 3 years ago.

Viewing 1 post (of 1 total)
  • Author
  • #21410
     Bazzer says:


    I don’t suppose there is such a thing in the pipeline that will accept maybe 6 on/off inputs and maybe an odd analogue one too. Also useful would be several dry contacts from a couple of relays.

    To put 6 lightwave magnetic switches on all the openable windows in the bedroom for example would be expensive where as 6 burglar alarm reed switches with thin cable running back to the box mounted down on the skirting board would surely be much less expensive. The relay could then control a linear actuator to open or close a window depending on temperature, time of day, room occupancy and burglar alarm status.

    Simple to implement I suppose with an Arduino and 433 MHz TxR, (or esp8266) maybe something to play with once I’ve finished building my arduino weather station!

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.