Lw825 relay overload or faulty?

LightwaveRF Communi… > Forum > Installation and… > Lw825 relay overloa…

LightwaveRF Community: Welcome Forums Installation and Troubleshooting Lw825 relay overload or faulty?

This topic contains 1 reply, has 2 voices, and was last updated by  btidey 11 months, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #24795
     Sparkyq says:

    Sparkyq
    Participant

    Having lots of trouble with lw825 relay driving about 2 lots of 60w of led strip, 20w of led lights each in their own channel. However when turning on all 3 they all turn off. Individually all work fine in fact the 2 leds strips work ok as well but when the 3rd set of lights is included it all goes wrong and i need to power cycle the device. Any ideas?

    All installed by an electrician so confident in the that he has checked it over.

    #24800
     btidey says:

    btidey
    Participant

    Shouldn’t be an output load problem. It is capable of 3Kw total.

    Sounds more like a faulty unit to me. Maybe when the third relay is turned on the extra current to its driver coil is causing the internal control circuit to drop out.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.