JSJSLW500 Link not working

LightwaveRF Communi… > Forum > Installation and… > JSJSLW500 Link not…

This topic contains 2 replies, has 2 voices, and was last updated by  Nigels0 3 weeks, 1 day ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #25440
     Nigels0 says:

    Nigels0
    Participant

    Hi,

    My Link isn’t working any more – not that I’ve been using it for quite some time as I’m using Domoticz to handle the switches.

    On plugging into the power, I get the display alternating between V2 Meter V2.94D and Lightwave V2.94D – the buttons aren’t responsive and the ethernet plug lights are out.

    Any ideas on how to reset/fix this issue?

    Regards

    #25441
     btidey says:

    btidey
    Participant

    First thing to check is the power supply. This has been known to pack up or give low voltage.

    If you have a meter check the voltage on the barrel. It should be around 12V.

    If power is the problem you can use any other 12V supply capable of giving 1A. These are available on line at low cost.

    See http://lightwaverfcommunity.org.uk/forums/topic/replacement-adapter-for-lw500wh-link/

    #25442
     Nigels0 says:

    Nigels0
    Participant

    Yes, was the PSU – the amps were all over the place (although it gave out 12v. Thanks.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.