Gen 2 and Gen 1

This topic contains 2 replies, has 2 voices, and was last updated by  Lodan 8 months, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #25066
     Lodan says:

    Lodan
    Participant

    Hello,

    Could you tell me please if its possible to run two lightwave links at the same time (gen 1 and gen 2) without interference?

    I’m interested in going Gen2 but upgrading everything at the start is cost prohibitive and as I understand the Gen 2 link behaves poorly with Gen 1 devices.

    Thanks very much

    #25067
     h3mp says:

    h3mp
    Participant

    Hi,

    Yes – this is how my setup currently works.
    I have a gen1 link in the loft which is doing mainly old devices upstairs, and a new gen2 link downstairs – both on the same account.

    My original plan was to do everything via the new gen2 link, but as they haven’t implemented gen1 support correctly, the split system was the best compromise.

    #25069
     Lodan says:

    Lodan
    Participant

    Thanks very much.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.