Factory Reset?

This topic contains 3 replies, has 2 voices, and was last updated by  Chester 2 years, 10 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #20766
     Phil Knight says:

    Phil Knight
    Participant

    Good morning all,

    Is there a way of unlinking wall sockets without knowing what they linked to?

    I seemed to have issue with sockets working when other items being turn on/off I have tried to unlink them without any success, so wondered if you could reset sockets etc back to factory settings.

    Many thanks, and a belated Happy New Year.

    Phil

    #20769
     Chester says:

    Chester
    Participant

    Time to RTFM! In the socket’s manual, go the the Device Setup section and read the the page beginning Clearing the memory. Remember if you use a Link, you’ll need to remove the device from the room and re-add it to work reliably.

    Hopefully clearing and re-adding solves the problem. Have a look at other posts to see similar issues and solutions as others have hit this before.

    Chester
    #20774
     Phil Knight says:

    Phil Knight
    Participant

    Hi Chester, Many thanks for your quick response. I don’t know how I missed that in the manual !

    Thanks again,

    Phil

    #20775
     Chester says:

    Chester
    Participant

    No worries. It’s ******* down with rain and I had planned to be outdoors!

    Did it work?

    Chester
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.