Wonder if you can help me choose the right Lightwave pieces for what I need :
I have an office at the bottom of my garden and would like to remotely control the lights from the house (as I always forget to turn them off when I leave!). The house is approx 20m from the office. I’d also like to control the lights using my iPhone (just for the hell of it!)
In the office I have :
1 x two gang switch – 1 circuit controls 8 x dimable LED lights – (not sure of the wattage but hoping as there are 8 they’ll be over 15w together). The second circuit controls 4 x LV downlighters outside which are also on a wired PIR sensor.
1 x single gang switch – which controls a single flood light behind the office.
An uplighter which plugs into a standard 13a socket.
As for control, as well as the iPhone app, I’d like to control the lights from both a remote control I would keep on my desk and from a second lightswitch mounted to the wall.
I am fairly sure I know what I need to order, but am confused on the remote control. I can’t see a remote (battery operated) light switch on the site and am not sure which remote control would suit me best.
Finally I have a question about the wifi link. I assume that plugs into my network and receives a remote command from the iPhone via the network (using the WLAN created by my wireless router)? Does it then control the lights via RF? If that’s correct, and i expanded my LightwaveRF system into the house, would I have to have a wifi link in my office and my house?
Hope this makes sense!
Any help much appreciated.
firstly – you are correct about the wifi link. In terms of expanding into the house – you may find that one wifilink will control the house and the office – the radio range is quite good on that device. If not, you can have 2 wifi links to extend the range and put one in the house and one in the office.
In terms of a lightswitch transmitter to control other devices, use a mood controller (master wall switch) which will transmit to and control as many devices as you want (and allow for mood lighting).
for the remote- you can use a handheld remote or a mood remote (depending on whether you want to do mainly on/off or groups of devices).
I’d recommend the Mood Remote over the hand helds as soon you’ll be able to use it to trigger sequences, i.e, a nightime sequence which switches off all the lights in your office at once.
You must be logged in to reply to this topic.