3-year old LightwaveRF dimmer switch – going faulty?

LightwaveRF Communi… > Forum > Installation and… > 3-year old Lightwav…

LightwaveRF Community: Welcome Forums Installation and Troubleshooting 3-year old LightwaveRF dimmer switch – going faulty?

This topic contains 1 reply, has 1 voice, and was last updated by  andy2510 2 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #23436
     andy2510 says:

    andy2510
    Participant

    Hi

    I’m having some trouble with one of my 2-gang dimmer switches which I bought nearly 3-years ago. The right hand gang seems to be fine, however the left hand one doesn’t seem to work properly at full load.

    Both gangs are connected to one light each, both 80W equivalent LED bulbs (which were given to us for free in 2015 as part of the deal for our solar panels). The right one is fine, the left has started to flash randomly. I’ve changed the bulb, however it seems to be worse. The bulb flashes a few times before coming on. Then randomly flashes, unless it is dimmed to about 30%.

    Is the switch itself failing?

    Thanks in advance

    Andy

    #23437
     andy2510 says:

    andy2510
    Participant

    PS = the bulbs are listed as dimable on the box.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.